A-W2K-1 NMEA 2000 to WiFi Gateway

$285.00

The W2K-1 has built-in conversion of NMEA 2000 messages into NMEA 0183 sentences, allowing a wide variety of vessel data (e.g., position, speed, course, wind speed, depth, engine data, AIS messages, etc.) to be shared with NMEA 0183-compatible software applications running on connected devices.

All the data received (or a selected subset) can be logged to its internal micro SD card for later downloading and analysis. This feature is highly useful for analysing race data, generating logbooks, diagnosing problems, or sharing voyage details. Approximately 16 days* of data can be stored on the pre-installed industrial-grade micro SD card, which can be upgraded if additional storage is required.

Actisense-i comes included as standard. It offers a full suite of diagnostic tools to check and diagnose potential issues on a boat’s electronics network, including voltage problems and the working status of all devices attached to the network. Actisense-i is designed to save installers and boaters time and money by providing confidence in onboard electronics.

The W2K-1 features Actisense’s “Reliability Built-In,” useful diagnostic LEDs, an internal antenna, enhanced password security, full certification, and is housed in an extremely rugged IP67 case.

*Bus load-dependent – can vary between 6 and 100 days

In stock

Converts NMEA 2000 to/from NMEA 0183 (streamed over Wi-Fi)
Supports both TCP and UDP, streams data using up to three separate data servers
Data protocols are selectable to be compatible with a wide range of navigation software and apps
Approximately 16 days of Voyage data recording (upgradable)
Diagnostic LEDs for NMEA 2000 bus activity and Wi-Fi Status
Works as an access point and client simultaneously
Remote Firmware upgradability
Low power consumption – 2 LEN (100 mA)
Supports 802.11 b/g/n (up to 150Mbps)
Automatically measures and reports the NMEA 2000 bus voltage
User Manual embedded on the device, easily accessible via browser
Each device has a unique default SSID and Password for enhanced security
Actisense-i diagnostic tools

Benefits:

Two-in-one NMEA 2000 to Wi-Fi Gateway and data logger
Enables use of mobile devices and laptops without the hassle of a physical connection
Compatible with a wide range of NMEA 2000 & NMEA 0183 applications
Ruggedised IP67 casing suitable for wet and harsh environments
Works out of the box with a pre-installed industrial-grade SD card
Integrated antenna reduces the chance of physical damage
Quick and easy to install

Power Supply:

Supply Voltage: 9 to 30V DC
Supply Current: 70mA (avg.) @ 12V DC; 100mA (avg.) @ 9V DC
Load Equivalent Number (LEN): 2
Supply Protection: Continuous reverse polarity and transient overvoltage protection to 40V

Wi-Fi Radio:

Compatibility: IEEE 802.11 b/g/n
Speed: 802.11n up to 150Mbps
Frequency Band: 2.4GHz ~ 2.5GHz
Max Output Power: 20 dBm
Antenna: Integrated internal antenna
Range (Open space): 30 meters
Security: WPA_PSK, WPA2_PSK, WPA_WPA2_PSK

Configuration:

IP Support: Supports TCP and UDP broadcast
Data Servers: Three separate data servers
Data Protocols: NMEA 0183 & five proprietary
Security: SSID and Password configurable (Unique defaults per device)

Diagnostics:

Power LED: Blue
NMEA 2000 Tx LED: Orange
NMEA 2000 Rx LED: Green
Status LED: Yellow
micro SD Card: 8GB Industrial Grade, FAT32

Mechanical:

Housing Material (Body): Polycarbonate
Housing Material (Endcaps): PBT
NMEA 2000 Connector: M12 Male (A polarised) connector moulded into case
NMEA 2000 Connector Material: Nickel-plated brass
Weight: 80g
Dimensions: 106mm (L) x 73mm (W) x 24mm (H)

Environmental:

Environmental Protection: IP67
Operating Temperature: -20°C to +55°C
Storage Temperature: -40°C to +85°C
Recommended Humidity: 0 – 93% RH

Approvals and Certifications:

NMEA 2000 Certified
RoHS and REACH compliant
RF Module Certification: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC
EMC: EN 301489-1 V2.2.0:2017, EN301489-17 V3.2.0:2017, FCC part 15b, ICES-003, ANSI C63.4:2014, Class B
Radio: EN 300 328