A-NGX-1-ISO NMEA2000/NMEA0183 converter

$260.00

The handy firewall feature enforces the NMEA 2000 bus rules, so software developers can create compliant software at a fraction of the direct certification costs. The supporting Actisense Software Development Kit (SDK) helps to reduce the required development time.

Actisense welcomes enquiries from software manufacturers who would like to incorporate NMEA 2000 and the NGX-1 into their software.

Bridge an NMEA 2000 network with your old 0183 electronics using the NGX-1.

The NGX-1 has the largest range of conversions available on the market. To see a full up-to-date list of the conversions the various configurations can handle, please click here.

The NGX-1 is available in two versions:

NGX-1-ISO: Equipped with a bare wire open-ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.
NGX-1-USB: Equipped with a USB cable for direct Plug and Play connectivity to a PC.

In stock

Vital NMEA 2000 diagnostic tool
USB version is fully isolated to prevent dangerous ground loops
ISO version has OPTO-isolated input and ISO-Drive™ output for safely interfacing with RS232 or RS422
Up to 230,400 baud data transfer rate
Advanced configuration using Actisense Toolkit allows Tx/Rx lists and Tx rates to be set
Supports Fast Heading at 10Hz
Multiple diagnostic LEDs

Benefits:

Allows all major PC Chartplotter applications to interface with the NMEA 2000 bus
Provides a rule-enforcing firewall between the PC and the NMEA 2000 bus
Powerful diagnosis of the NMEA 2000 network using the free NMEA Reader software provided
Configure and flash-update Actisense products on the bus
Upgrade NMEA 0183 equipment to NMEA 2000
Allow NMEA 0183 devices to receive vital NMEA 2000 data
Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together
Reliable, renowned bi-directional conversion engine
Supports a wide range of conversions including AIS
Easily configurable using Actisense Toolkit

Power Supply: 9 to 30V DC (NMEA 2000 Port), 62mA @ 9V DC
USB Variant: Supply current 10mA @ 5V DC (USB Host Port), cable length 1.8m
NMEA 2000 Port: Speed/Baud Rate 250kbps, M12 Male (A coded)
ISO Port: Compatibility with NMEA 0183, RS232, RS422; Speed/Baud Rate 4800 to 230400; Output protection includes short circuit and ESD
Isolation: Galvanic Isolation tested to 1000V between USB/ISO ports and NMEA 2000 Port
Housing Material: Flame retardant Polycarbonate body and PBT end caps
Environmental Protection: IP68 rated
Temperature Range: Operating -25°C to +70°C, Storage -30°C to +70°C
Approvals: NMEA 2000 certified, compliant with IEC 61162-1 & 61162-2, RoHS, and REACH
EMC Standards: EN 60945:2002, EN 301 489-1, FCC Part 15b, and others